亚投彩票

wise Product Detail Banner

WISE-1000W

Product description Figure 1
Product description Figure 2
Product description Figure 3
Product description Figure 3
Product configuration
Installation size
  • 400W driver dimensions and openings
  • 750W driver dimension drawing and hole drawing
  • 1000W driver dimensions and openings
  • 1500W driver dimensions and openings
Specifications

Basic specifications

Main circuit power
Single-phase / three-phase 200V-240V 50 / 60HZ

Control loop power
Single-phase 200V-240V 50 / 60HZ

Encoder feedback
17-bit (resolution 131072) 7-wire serial absolute encoder
20-bit (resolution 1048576) 5-wire serial absolute encoder
2500-bit (resolution 1000) ABZ incremental encoder

Pulse direction input signal
2 sets of differential input signals (1 set of pulse differential inputs, 1 set of directional differential inputs)

Pulse output
Encoder pulse output via long-line driver (A, B, Z phase)

Communication function
Connect to computer (iMotion software) via USB

Control mode
1.Position control; 2.Speed control; 3.Torque control

Position control

Control input
1. Clear the deviation count to zero; 2. Disable the command pulse input; 3. Select the internal command speed; 4. Zero berth

Control output
Positioning completion output

Maximum pulse input frequency
Linear drive: 1Mpps; open collector: 200kpps

Pulse output mode
Differential input (1 positive / negative; 2.A phase / B phase; 3.command / direction)

Command pulse frequency division and multiplication
Electronic gear ratio used in the range of 1 / 1000-1000 times

filter
Instruction smoothing filter, FIR filter, delay filter

A相、B相、C相:线性驱动输出;分频脉冲数:1-编码器分辨率四分之一设定 Pulse output A-phase, B-phase, C-phase: linear drive output; frequency-divided pulse number: 1-encoder resolution quarter setting

speed control

Control input
1. Internal command speed selection; 2. Internal command speed selection; 3. Internal command speed selection

Control output
Speed reached

Internal speed command
8 internal speeds can be switched according to external control input

Speed command acceleration / deceleration adjustment
Acceleration / deceleration time can be set independently, and S curve acceleration / deceleration settings

Zero Speed Berth
Zero speed berth function can be set to work in speed mode or position mode in speed mode

Torque control

Control input
Zero speed berth input

速度到达 Control output speed reached

通过参数可设定速度限制 Speed limit Speed can be set by parameters

一个一阶低通滤波器、四个陷波滤波器 Torque command filter: a first-order low-pass filter, four notch filters

protection

Hardware protection
Overvoltage, undervoltage, overcurrent, overspeed, overload, brake resistor overload, driver overheating, encoder abnormality

存储器故障、初始化故障、I/O分配异常、位置偏差过大等 Software protection memory failure, initialization failure, abnormal I / O allocation, excessive position deviation, etc.

Encryption function

Support hardware encryption

widely used in……

success case
Driven by big wisdom

Woodworking machinery and equipment
Mould machine
Glass edger
Manipulator
Embroidery machine

Copyright © Shanghai Weihong Electronic Technology Co., Ltd. 2015-2019 Power by Weihong Co., Ltd. Shanghai ICP112580115-1