亚投彩票

NK210T Banner

NK210T-H1 / NK210T-H2

Product description Figure 1
Product description Figure 2
Product description Figure 3
Product configuration
Installation size
Specifications

CNC specifications

Number of standard control axes
Triaxial

Hardware specifications

CPU
ARM11

Main frequency
600M

RAM
128M

Flash
256M

Display size
8-inch LCD display

Display resolution
800 × 600

I / O count
Standard configuration: I38 / O18, I27 / O8, expandable

Performance
After electromagnetic interference, group pulse and surge test, the product reaches GB / T 17626.5-2008 fourth level protection standard. The shock resistance meets GB / T 2423.10-2008 standard. After high and low temperature test, it reaches industrial standard (GB / T 2423.102-2008 )

G code system

Types of
A / B / C

Tool management functions

Including positioning, linear interpolation, circular interpolation, thread cutting and interpolation, plane selection, reference point workpiece coordinate system, local coordinate system, tool measurement, tool compensation, single fixed cycle command, compound fixed cycle command, pause, etc.

Interpolation function

G00, G01, G02, G02.1, G02.2, G03, G03.1, G03.2, G32, G34

Feed function

Maximum rapid speed: 120000mm / min, maximum feed speed: 48000mm / min
Front acceleration and deceleration control, speed smooth control, corner control, track smoothing function, pre-reading feed ratio: 0 ~ 120% (16 steps)
Open PLC, ladder diagram editing

Thread function

Single head / multi-head thread, metric / inch thread, straight thread / taper thread / face thread, constant pitch / variable pitch thread withdrawal length, angle and speed can be set. Digital spindle thread pitch: 0.01 ~ 500mm (metric), 0.06 ~ 25400 teeth / inch (imperial)

Spindle function

Bus spindle, analog spindle, digital spindle analog spindle automatic / manual gear shifting, digital spindle positioning, support digital spindle "speed / position" mode switching spindle override: 50 ~ 120% (level 11), analog voltage: 0 ~ 10V (stepless )
1-way spindle encoder feedback, the number of encoder lines can be set, chuck control during spindle operation, constant linear speed control of the spindle (G96 / G97)

Tool function

3-axis tool compensation (X / Z / Y), number of tool offsets: 32 groups Tool length compensation, tool radius compensation: ± 999.999mm / ± 99.9999inch
3-axis tool compensation (X / Z / Y), number of tool offsets: 32 groups Tool length compensation, tool radius compensation: ± 999.999mm / ± 99.9999inch

Program storage and editing

Program capacity: 512M (built-in), unlimited number of program storage, support DNC online processing program programming: relative programming, absolute programming, mixed programming, decimal point program editing: program typing, modification, deletion, insertion, retrieval, replacement, check Multi-segment MDI program editing and running subroutine calls

Program check function

Fast graphic drawing of program track, dry running, single-stage running, etc.

Compensation function

Tool length compensation, tool nose radius compensation (G40, G41, G42)
Backlash compensation: 0 ~ 8mm, pitch error compensation per point compensation: ± 0.1mm

<

widely used in……

success case
Optimized for turning applications

Turn-milling compound
Four-station flat car
Precision row knife
Inclined car
Take heart

Copyright © Shanghai Weihong Electronic Technology Co., Ltd. 2015-2019 Power by Weihong Co., Ltd. Shanghai ICP112580115-1